A Revolutionary Product
in
Water Diverter Technology . . .
Horizontal Diversion Valve
- Designed to be installed at the horizontal pipe feeding your tank
- Easy to Install
- Diversion is Adjustable -
Allowing complete control over the quantity of water to be delivered
- Fully Automatic -
Once the lever is set it will shut and reset automatically
- Internal Stainless Steel Leaf Screen
- Available in 90mm and 100mm
- Connector to 90mm storm-water pipe is available -
Attached to the base of SafeRain to direct water away from the tank via 90mm storm water pipe
- SafeRain is compact -
Maximum weight in use is approximately 3 kg
- Backed by a 2 year warranty
- Extends the Life of your Tank -
By keeping corrosive material out of the tank
Typically the unit closes at flow rates between 10 litres/min and 20 litres/min adjustable. Any small debris left behind in Figure 4 is flushed out with the next rain. Large leaves, sticks and such like are caught in a detachable screen accessible by the screw access.
Once a SafeRain is fitted, polluted water diversion of between 5-1,000 litres is possible depending on setting.
 |
 |
| Fig 1. When rain starts, the tainted water is dumped from the base of the SafeRain valve. | Fig 2. After the polluted water is dumped, the valve shuts automatically. Clean water is then diverted to the tank. |
 |
 |
| Fig 3. When the rain stops SafeRain can remain closed for approximately 24 hours. Any further rain during this time goes to the tank. | Fig 4. SafeRain will drain completely resetting the unit automatically for the next rainfall. |
